Welcome to my FlamingFurnace, backyard metal casting blog.

Hi everyone, I mainly focus on metal casting projects using recycled scrap aluminum and other accessories in the pattern creations.
Aluminum is a very versatile material and I would like to promote the awareness of aluminum recycling via different metal casting projects.

Feel free to check my YouTube channel where I provide detailed explanations, tips & tutorials for best backyard aluminum casting methods, homemade foundry equipment & of course the importance of safety when working with molten aluminum.

So remember recycle and Enjoy my blog ;-)

Friday, January 4, 2013

Foundry Sand Casting Project For My Kids Room

recycling scrap aluminum
This is my first post for 2013, in this post I will explain how I created decorative animal shapes casted from aluminum. I decided I wanted to make a big toy drawer to clear all the mess in my kids room, at first I thought  of making just MDF shapes and paint them but then I thought it will be really cool if the animal shapes where from solid shiny aluminum. I collected some scrap metal and came across an old unused pressure cooker, so I decided to melt it in my homemade foundry and recycle it into something new. The first step was of course creating the casting patterns. I used 5mm MDF to create the elephants, dolphins and kangaroo pattern and green sand to create the sand mold impression.
sand casting process sand casting process foundry flask cope part foundry flask drag part
I started first making the sand mold for the elephants and dolphin's. As you can see the flask was a bit small for the kangaroos pattern so I used another smaller wooden flask for them. I also used green sand in order to create the pattern impressions in the sand, the process was easy working with a flat pattern.
wooden foundry flask cope part wooden foundry flask with patternfoundry flask covered with parting powder
After casting the aluminum animal shapes I cleaned all the extra aluminum with a metal file then sanded it with an electric sander. Once the cleaning part was done it was time to drill the brass screw holes and to start the polishing process. I think this process is the most time consuming part and it takes a lot of patience to get a
good result ;-)
after opening the foundry flask first stage of cleaning the aluminum casting all aluminum casting together kangaroo aluminum castingusing metal file to clean aluminum casting
I was really happy with the final results and it looks very nice hanging on the new toy drawer. I'm now thinking on how to create a larger pattern of some sort of shape but that's for a future post when i"ll have a new idea ;-)
new kids toy drawer aluminum shapes attached to toy drawer aluminum casting

Backyard Metal Casting Setup Information

In this post I am going to try and cover for those who are interested in the setup of  a home made/backyard foundry. This is all based on my experience with aluminum metal casting. I tried different methods learning mostly by reading about metal casting and practical trial and error, whatever worked the best for me ;-)
I have to state that this post as all my other posts is based on my experience and is not a guide on "how to".
If anyone decides to use my method he will to do it on his on risk, I advice you read my site safety deceleration.
So lets get started: the most important part of running a homemade foundry is having all the necessary P.P.E. Always work with full body protective gear head to toe when handling molten metal never cut corners on this part.  The main components for a homemade foundry are:

  • All P.P.E designated for foundry to protect the metal caster from molten metal injuries.
  • Well insulated foundry for example using an old gas cylinder, metal bin, flower pot etc'. When I say insulated I mean good refractory to keep all the heat in the furnace. 
  • Foundry energy source to heat the solid aluminum bringing it to 660°C (melting point). This could be achieved with charcoals + air blower, Gas burner, waste oil burner or an electric furnace. Every energy source has its advantages and disadvantages.
  • Crucible is the container that holds the solid aluminum parts until it turns into molten metal.  The foundry crucible has to be solid enough to withstand the high temperature without breaking. A bad crucible could result in loosing all the molten metal at the bottom of the furnace. There are different types of commercial crucibles such as clay graphite crucibles, silicon carbide crucibles, ceramic crucibles and more. I will focus on a homemade metal crucible.
  • Foundry tools such as crucible lifting tool / tongs, crucible dross skimming spoon, water pump pliers.
  • Ingot tray some sort of container that will hold the left over aluminum from every casting. It is possible to use a metal muffin tray to get nice and neat ingots or to weld L bars for larger ingots (easy solution for stacking).
  • Molding sand either green sand or oil bonded sand. Both are good for casting aluminum parts.
  • Foundry flask for sand casting, either from timber or metal is good as long as the cope and drag parts align.
  • Aluminum source there are many objects around us made of aluminum that can easily be melted and recycled into a new object. A good source of aluminum could be found in car engine parts such as an engine block, bell housing etc'.
First I will start explaining about a homemade crucible. I have experimented with different types of crucible mostly made from metal. I started using food cans and a kitchen pot, I would not recommend anyone to use cans or pots as crucible the metal is very thin and it will break very quickly under the high temperature of the foundry (see image below). The molten metal can end at the bottom of the furnace or worst case scenario on the metal casters feet. So a big no no for food cans as crucible.  After using a metal  pipe as a crucible that was too narrow was no use at all. Then I used a square crucible the metal was a bit thicker and lasted for about 10-20 casting sessions but eventually gave in and the molten metal ended at the bottom of my foundry. See image of aluminum blob. It took me a lot of time to get the solidified aluminum blob out from the bottom of the furnace, I have remelted it back into ingots.
foundry metal crucible Aluminum blob
At this stage I decided to make a proper metal crucible that will last me longer. Two things where important for me, first to make it as safe as possible and secondly to get max volume of molten aluminum out of it as my foundry is relatively small.
I used old scrap metal from a broken scooter to make all the crucible lifting tools.
The only part I purchased from a metal fabricator factory was a metal pipe size: 140mm-Diameter and 8mm-thickness. I asked the guy in the factory to cut two sizes one: 200mm (H) the other 110mm (H). Its more convenient to use smaller crucibles for small casting projects.  I also bought a metal base plate 5mm -thick for the crucible. I cut the metal plate with an angle grinder into a octagon shape that way it fit nicely into the foundry cavity. I also threaded two bolts into the sides of the crucible to be used with the crucible lifting tool.
two metal crucibles Metal crucible base About to melt  my old aluminum sand rammer After welding crucible baseCrucible in fire with molten aluminum
Next stage was to make the lifting tool, I have used scrap metal for this part. The lifting tool is made from two parts the actual lifting tool and a tilting tool.
The lifting tool is constructed from an old scooter and square iron tube and the tilting handle I made by welding a re-bar into an L-shape.
used scooter scrap metal after cutting metal to correct size Drilling crucible lifting tool part cutting the crucible lifting parts fabricating the crucible lifting parts attaching bolts to crucible lifting tool
After making the lifting tools its important to check that they work well ,for example lifting the crucible in and out of the foundry checking that nothing gets in the way. Its also very important to make sure that while lifting the crucible and tilting the crucible that it won't fall out of the lifting tool notches.  The last tool and the most easiest one to make is the foundry skimming tool. Its always good practice to make a long handle for the skimming spoon. I made my skimming spoon from a metal rod and I welded to it a large kitchen spoon.
after finishing the foundry tools dry ftest of crucible and lifting tool foundry tools tilting crucible dry test bolts in cruciblee will be used to lift it molten aluminum skimming spoon
This metal crucible is excellent for backyard metal casting, I have used it many times and it works perfect in combination with the crucible tools. The next thing I needed is a good and functional ingot tray. Since I am using bigger crucible I am using more aluminum and the muffin tray that I used before is a bit small at this stage. Ingot tray size can vary depended on the size of the foundry and the volume of the castings. The new Ingot tray I made from welded L-bars. The triangular aluminum ingots make it easy to stack pile them. It is very important to preheat the ingot tray during every casting session just before pouring the molten metal into it. I usually place the ingot tray on top of the hot foundry for a few minutes before pouring the molten metal into it.
checking crucible and ingot size different aluminum ingots sizes muffin tray for aluminum ingots making of L bar ingot mould first use of ingot mould easy to remove aluminum ingots triangular  aluminum ingots make it easy to stack pile them
I still didn't have time to finish my aluminum flask project at the moment I have only 4 parts complete and I have to sand cast 4 more. A good solution for temporary flask or just a cheap foundry flask is to make it out of timber. The flask could be made from scrap timber as long as the cope and drag of the flask align together. The size of the flask depends on the size of the object to be casted. Just remember the bigger the flask is the more casting sand and weight you will have to take into consideration. For large wood flask it's recommended to create some sort of ribs inside the flask either by nailing some sort of strip or to make grooves in the inside of the flask. What ever works is good if it keeps the sand in the flask ;-)
open wooden foundry flask foundry flask cope and drag closed different sizes of foundry flasks first use of large metal crucible shiny molten metal aluminum ingots
The last two images are the main components needed to run a homemade foundry. In my next posts I will cover the issues like how to polish aluminum parts and about different sources of aluminum for the backyard metal caster.
foundry tools, burner, ingots, green sand foundry tools and aluminum ingots
Happy casting ;-)

Thanks for your Donations ;-)